Eyemax Super Dome Built-in Active Balun Connection Dual Power 2.8-12MM
Eyemax Super Dome Built-in Active Balun Connection Dual Power 2.8-12MM





- SUPERDOME series camera : 3-Axis
- ACTIVE BALUN (UTP) built-in to the camera (UTP and BNC connector available)
- 1/3" Sony Super HAD 2 color CCD sensor
- High Resolution - 580 (H) TV Line in Color
- Minimum Illumination - 0.3 Lux (Color) / 0.03 Lux (night)
- SENS-UP : intensified low light
- 3-Axis Construction
- 2.8~12mm Auto-Iris Zoom Lens Installed
- OSD (On Screen Display) - Easy camera setup
- 3DNR (3D Digital Noise Reduction) - Clear image / more recording time on DVR System
- D-WDR Functions
- DC 12V / AC 24V Dual Power
| Spec Sheet | |
| Mirror(H-REV) / FLIP(V-REV) / Freeze | Mirror / V-flip / Rotate |
| Sensor | 1/3 inch SONY Super HAD 2 CCD used |
| Total Pixel | 811(H) × 508(V) 410K pixels (NTSC) 795(H) × 595(V) 470K pixels (PAL) |
| Effective Pixels | 768(H) × 494(V) 380K pixels (NTSC) 752(H) × 582(V) 440K pixels (PAL) |
| Scanning System | 2:1 Interlace |
| Synchronization | Internal |
| Frequency | Horizontal : 15.734KHz / Vertical : 59.94Hz (NTSC) Horizontal : 15.625KHz / Vertical : 50.00Hz (PAL) |
| S/N (Y signal) | More than 50dB (AGC off) |
| Video Output | CVBS : 1.0Vp-p / 75ohm |
| Min. Illumination | 0.3 Lux at F1.2 (Color) / 0.03 Lux (BW) |
| Resolutions | 580 TV Lines |
| Electronic Shutter Speed | Auto / Manual (×128 ~ 1/60 sec ~ 1/120,000 sec) (NTSC) Auto / Manual (×128 ~ 1/50 sec ~ 1/120,000 sec) (PAL) |
| OSD (On Screen Display) | Built-in |
| White Balance | ATW / AWB / AWC -> SET / Manual / Indoor / Outdoor (2,000°K~ 20,000°K) |
| Backlight Compensation (BLC) | ON / OFF |
| Gain Control | ON / OFF |
| Day , Night | ON / OFF |
| Privacy Mask | ON / OFF (8 Zone) |
| Motion detection | ON / OFF (4 AREA) |
| Power Source | AC 24V or DC 12V (Dual Power) |
| Operating Temperature / Humidity | -10°C~+50°C(14°F ~ 122°F) / 30~80% RH |
| Storage Temperature / Humidity | -20°C~+60°C(-4°F ~ 140°F) / 20~90% RH |
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product rules mechanism and only those products matching your criteria will display the modules.
Any module can be selectively activated per device. Every module has an advanced Status feature allowing you to load the module based on device type, customer login status and other criteria. Imagine the possibilities.
Responsive video embeds with max width and float options, as well as full container styles on the video-responsive class. Display videos in your descriptions, blog posts, or custom modules anywhere on the page. Just wrap the iframe in additional div elements with the required classes and you have full control over your video layout.